Cảm biến lửa TAKEX FP-5500E

Cảm biến lửa TAKEX FP-5500E

Chat Zalo hoặc Gọi ngay 0984 104 365 để được tư vấn giá tốt!

7.306.000 ₫
Tags: Category:

Cảm biến lửa TAKEX FP-5500E

– High sensitivity ultraviolet flame sensor + wide angle intrusion PIR.

– Dual output modes; AND/OR.

– Forced output operation following continued flame detection.

– Sensitivity adjustment.

– Alarm memory function.

– Detection timer.

Specification

Flame sensor
Detection system Ultraviolet rays (Detection wave length 185 to 260nm)
Detection distance 15m: 15cm flame on 4cm square pan in front
10m: 7cm lighter flame in front
Detection area angle Approx. 120° conically
Detection setting Detection timer: 4steps (1sec, 3sec, 6sec, 15sec)
Detection sensitivity: (H [100%], L [50%])
*Selectable only in ‘AND’ mode
(Fixed to H [100%] in ‘AND’ mode
Alarm LED (RED) Inside front window
– Lighting at alarm
 (Detection time + off  delay. Approx. 2 sec.)
*Blinking (3 min)/Lighting (47 min) at memory
Passive sensor
Detection system Passive infrared
Detection area angle Wide Angle 15m Max
Sensitivity setting 4 steps (100%, 80%, 50%, 20%)
Alarm LED (RED) Inside front window
– Lighting at alarm
 (Detection time +  off delay. Approx. 2 sec.)
*Blinking (3 min)/Lighting (47 min) at memory
Alarm output 
Contact operation – AND mode
   + When flame sensor detects twice within set “AND” timer,
 (Detection time after 2nd detection + o  delay. Approx. 2 sec.) or
   + When flame sensor detects for “Flame duration time”
 (Detection time after 30/60 sec + o  delay. Approx. 2 sec.)
– Individual mode
   + When flame sensor detects (Detection time + off  delay. Approx. 2 sec.)
Contact method Dry contact relay (Semi-Conductor) (N.C./N.O. selectable)
Contact capacity 30V (AC/DC) 0.25A Max. (resistive load)
Alarm output
Contact operation AND mode
   + When both flame and passive sensor detect within set “AND” timer
 (Detection time (2 sec Min.)
Individual mode
   + When passive sensor detects (One shot. Approx. 2 sec)
Contact method Dry contact relay (Semi-Conductor) (N.C./N.O. selectable)
Contact capacity 30V (AC/DC) 0.25A Max. (resistive load)
General
Power supply 10V to 30VDC (non-polarity)
Power consunmption 25mA Max.
Alarm memory Reset after blinking (3 min) and lighting (47 min)
(Operative individually with flame and passive sensors)
* No indication when Alarm LED is off
Ambient temperature range -20°C to + 50°C (-4°F to + 122°F)
without condensation and freeze
Mounting position Indoor/outdoor (IP43)
Connections  Lead wire (Cord length: 0.5m) (6 cores: 2×power, 4×alarm)
Weight Approx. 550g (including flange)
Appearance Body: Resin (Black)

– Bảo hành: 12 tháng.

Related products