Cảm biến rung chấn động HONEYWELL SC100

Liên hệ

Cảm biến rung chấn động HONEYWELL SC100

– Cảm biến rung chấn động HONEYWELL SC100 dùng cho ATM.

– Tích hợp với hệ tống báo động trung tâm.

Thông số kỹ thuật

POWER REQUIREMENTS
Supply Voltage	8 – 16VDC, nominal 12VDC
Current Consumption	Typical 3 mA @ 12VDC
SENSITIVITY
Adjustable Sensitivity	4 levels by DIP Switches
ATMs/Vault Selection	by DIP switch
Reduced Sensitivity Input	For maintenance & Service: Active low (<1.5 VDC)
Detection Radius	16.4’
Alarm Algorithm	Highly sensitive to all known attacks while rejecting known false alarm sources by innovative filters and firmware
ALARM OUTPUTS
Solid State Relay (Change Over)	30VDC/100 mA; Type C
Open Collector	Active low during alarm
Alarm Hold Time	Approx. 2.5 secs
SABOTAGE PROTECTION
Pry-off and Cover Switch	30 VDC/100 mA
Low Supply Voltage Alarm	< 7 VDC
Temperature Alarm	185° F, 23° F, 41° F
Internal Functional Alarm	Stainless steel drill shield
INPUTS
Remote Test	Active low 1.5 VDC, test duration < 0.5 sec
Reduced Sensitivity Input	Active low 1.5 VDC, test duration < 0.5 sec Sensitivity reduction to 12.5 %
ENVIRONMENTAL CONDITIONS
Maximum Humidity	95% RH (non-condensing)
Operating Temperature	-40° F – 158° F
Storage Temperature	-58° F – 158° F
Environmental Class (VdS)	III
Housing Protection Category	IP43
HOUSING
Dimensions (H x W x D)	3.15 x 2.36 x .83 inch
Chassis and Cover	Die-cast metal
Color	RAL7035 (light gray)
Weight	5 lbs.

– Bảo hành: 12 tháng.