2.626.000 ₫

Công tắc cảm ứng hiện diện THEBEN theRonda S360-101 FLAT DE WH

– Passive infra-red presence detector for ceiling installation

– Circular detection area 360°, up to Ø 8 m (50 m2) at mounting height 3 m

– 1 channel light (Relay, 230 V) and 1 channel presence (Relay, floating for HVAC control)

– Automatic motion and brightness-dependent control for lighting and HVAC

– Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs

– Operation as fully automatic device

– Brightness switching value configurable, teach-in function

– Pulse function for staircase light time switch

– Channel H, presence: relay, floating e.g. for HVAC control

– Time delay configurable

– Detection sensitivity configurable

– Test mode for checking function and detection area

– Ready for immediate use due to factory presetting (Brightness switching value 300 lux, Time delay 10 min.)

– One of these optional remote controls is required for changing the values and attitudes:

– Management remote control SendoPro

– Installation remote control theSenda P

– Optional user remote control: theSenda S

Specifications

Operating voltage	230 V AC
Frequency	50 Hz
Installation height	2 – 4 m
Minimum height	> 1,7 m
Installation type	Ceiling mounting
Colour	White
Switching output	Light \| Presence
Light measurement	Mixed light measurement
Setting range brightness	30 – 3000 lx
Light switch-off delay	10 s – 60 min
Lamps	Incandescent/halogen lamps, fluorescent lamps, Energy saving lamps, LEDs
Incandescent/halogen lamp load	2300 W
Inrush current	max. 400 A / 200 µs
LED lamp < 2 W	25 W
LED lamp 2-8 W	250 W
LED lamp > 8 W	250 W
Switching capacity presence	50 W / 50 VA (max. 2 A), min. 0,5 mV / 10mA
Type of connection	Screw terminals
Max. cable cross section	max. 2 x 2,5 mm²
Detection range	50 m² (ø 8 m \| 360°)
Detection angle	360°
Ambient temperature	-15°C … 50°C
Type of protection	IP 54 (when fitted)

– Bảo hành: 12 tháng.