Đầu báo Gas tại chỗ GST C-9602LW

– C-9602LW Conventional Gas Detector (the detector) is wall-mounted, designed to check and monitor liquefied petroleum gas (LPG) of leakage in such applications as houses, hotels and apartments.

Thông số kỹ thuật

– Operating Voltage: 187VAC~253VAC.

– Power Consumption: Standby State≤3.0W/ Alarm State≤5.0W.

– Output capacity and control mode: 

   + Voltage contact: For 12VDC one-way pulse solenoid, whose driving capability is 1000μF capacitance discharge.

   + Volt-free contact: Volt-free normally open contact, its capacity is 220V/1A used for controlling connected devices.

– Alarm Set Point: Liquefied Petroleum Gas: 2200×10-6 (10%LEL)

– Indicator:

   + Power LED: Green, flashes in warm-up state and then constantly lights.

   + Alarm/ Fault LED: Dual color. It’s red when the detector goes into alarm, and yellow into fault. 

– Buzzer: It sounds twice every second in alarming, and once every three seconds in fault.

– Self Test: Pressing Self-Test, the LEDs will flash in turn with the buzzer sounding three times.

– Life of Sensor: 5 years.

– Operating Environment:

   + Temperature: -10℃~ +50℃

   + Relative Humidity≤95%, non condensing

– Dimension: 121 × 87 × 47 mm.

– Ingress Protection Rating: IP30.

– Material and Color of Enclosure: ABS, ivory white.

– Weight: 320g.

– Mounting Hole Distance: 23mm.