Máy dò hồng ngoại PIR HONEYWELL ADPRO PRO E-45DH (CH10023301)

Máy dò hồng ngoại PIR HONEYWELL ADPRO PRO E-45DH (CH10023301)

Chat Zalo hoặc Gọi ngay 0984 104 365 để được tư vấn giá tốt!

Liên hệ
Tags: Category:

Máy dò hồng ngoại PIR HONEYWELL ADPRO PRO E-45DH (CH10023301)

– Detection principle: Curtain, directional, medium-range.

– Nominal range (L x W): 60 x 4.2 m.

– Angle of beam: 4°.

– Alarm indicator: Internal LED (during commissioning).

– Data-Interface: RS-485, 9600 baud/s // on-board.

– Supply voltage: 10.5 – 30 VDC, 24 VAC ±15% auto-sensing.

– IP-Rate: IP66.

– Dimensions (L x W x H): 358 x 188 x 290 mm.

– Weight: Approx. 1.65 kg.

Thông số kỹ thuật

Model PRO E-45DH
Detection principle Curtain, directional, medium-range
Nominal range (L x W), width at nominal range 60 m x 4.2 m
Angle of beam (angle of aperture, AA) 4°
360PROtectTM – Near Surrounding Area Surveillance -1 m up to +8 m (-3 ft up to +26 ft)
Spectral response 8-14μ, double filtered
Filter (Front Window) Standard versions: HDPE-Filter, IR transmissive / H-Versions: Silicon Wafer
Pyroelectric Sensor (differential) dual-channel
Detection speed range 0.2 – 5 m/s (0.7 – 16 ft/s)
Alarm outputs (free programmable) 5
Alarm settings (free programmable) Alarm in Main Zone; Alarm Creep Zone (360PROtect); Pulse Count; Alarm Tamper Bracket Switch, Alarm Cover Switch, Alarm Detector Alignment, Alarm Antimasking, Alarm Fault (Power Supply, Temperature, Heating)
Output load (max.) 3x (Standard) / 5x (H-version) Solid State Relais 75 mA max. @ 60 VDC
Alarm indicator Internal LED (during commissioning)
Data-Interface RS-485, 9600 baud/s // on-board
Cable feed (diameter) Rubber seal for 4x 5-8mm cables and 4x 1-2mm wires
Cable termination (screw terminals) Screw terminals 0.34 mm2 to 1,5 mm² (AWG 28 -16)
Supply voltage 10.5 – 30 VDC, 24 VAC ±15% auto-sensing
Supply current approx. 18 mA @ 12 VDC, 12 mA @ 24 VDC, 30mA @ 24 VAC (@ +25°C), excluding heater
Heater power approx. 0.5 W / ~41 mA @ 12 VDC and -40°C
Operating temperature and temperature compensation Standard version with HDPE-filter (no heater): -20 ºC to +60 ºC (-4 ºF to +140 ºF)
H-version with Silicon Wafer and heater: -40 °C to +60 °C (-40 ºF to +140 ºF)
Full compensation over entire operating temperature range
Housing material Luran® S (ASA)
IP-Rate  IP66
Mounting Wall and pole mounting — cable managed bracket (CMB) included
Weight (incl. cable managed bracket) approx. 1.65 kg
Dimensions (L x W x H) 358 mm x 188 mm x 290 mm

– Bảo hành: 12 tháng.

Related products