Module điều khiển SIEMENS FDCIO181-2

Liên hệ

Module điều khiển SIEMENS FDCIO181-2

– Microprocessor-controlled signal evaluation.

– Automatic address setting, without encoder settings or DIP switch.

– 2 monitored input, 2 monitored output.

– LED display of input and output status.

– Input lines monitored for open line or short/open circuit.

– Prevention of noise interference through intelligent analysis of input signals.

– Output lines monitored for open line or short/open circuit (when potential output not activated).

– Output monitoring configurable (on/off).

– Control output for equipment 24 VDC, max. 2A.

– Communication with the controller via FD18-BUS (detector line).

– Directly used in dry areas. Applicable in dusty and humid areas when installed in FDCH221 housing.

– “Sticker Method” easy for commissioning.

Thông số kỹ thuật

Model	FDCIO181-2
Operating voltage	12…32 VDC
Operating current (quiescent)	0.56 mA
Activation current	0.85 mA
Output	– Capacity: 2A@ 24VDC – Monitoring resistor: 3.3 kΩ (1/4w) – Diode: 1N5404
Input	– Monitoring resistor: 3.3 kΩ/ 680Ω
Operating temperature	0…+42 °C
Storage temperature	-20…+75 °C
Humidity	≤95% rel
Communication protocol	FD18-BUS
Load factors	5
Connection terminals	1.0…1.5 mm2
Color	– Housing: White, RAL 9010 – Cover: Transparent
Protection category EN60529/ IEC529/ GB4208-93	With FDCH221 housing: IP65
Approval (for Russian)	TR RF N123-FZ

– Xuất xứ: Trung Quốc.

– Bảo hành: 12 tháng.