Module giám sát SIEMENS FDCI181-2

Liên hệ

Module giám sát SIEMENS FDCI181-2

– 2 monitored digital input.

– Input lines are monitored for open line and short/open circuit (terminal resistors is mandatory).

– Microprocessor-controlled signal evaluation.

– Prevention of noise interference through intelligent analysis of input signals.

– LED display of input status.

– Automatic address setting, without encoder settings or Dip-switch.

– Power supply via FD18-BUS.

– Communication with controller via FD18-BUS(detection line).

– Directly used in dry areas, Applicable in dusty and humid areas when installed in FDCH221 housing.

– “Sticker Method” easy for commissioning.

Thông số kỹ thuật

Model	FDCI181-2
Operating voltage	12 … 32 VDC
Operating current (Quiescent)	0.33 mA
Activation current	0.45 mA
Monitoring resistors	3.3KΩ (1/4w)/680Ω (1/4w)
Operating temperature	0 … +42 °C
Storage temperature	-20 … +75 °C
Humidity	≤95 %
Communication protocol	FD18-BUS
Load factors	3
Connection terminals	1.0 … 1.5 mm2
Color	– Housing: white, RAL 9010 – Cover: transparent
Protection category EN60529 / IEC529/ GB4208-93	With housing FDCH221: IP65
Approval (for Russian)	TR RF N123-FZ

– Xuất xứ: Trung Quốc.

– Bảo hành: 12 tháng.