Trung tâm báo cháy 1 Loop NOTIFIER NFS320-E

– The NFS-320E intelligent Fire Alarm Control Panel is part of the ONYX Series of Fire Alarm Controls from NOTIFIER. In stand-alone or network configurations, ONYX Series products meet virtually every application requirement.

– Listed to UL Standard 864, 9th edition.

– One isolated intelligent Signaling Line Circuit (SLC) Style 4, 6 or 7.

– Up to 159 detectors (any mix of ion, photo, thermal, or multi-sensor) and 159 modules (Addressable pull stations, normally open contact devices, two-wire smoke, notification, or relay). 318 devices maximum.

– Standard 80-character display.

– 6.0 amp power supply with four Class A/B built-in Notification Appliance Circuits (NAC). Selectable System Sensor, Wheelock, or Gentex strobe synchronization.

– Built-in Alarm, Trouble, Security, and Supervisory relays.

– VeriFire® Tools online or offline programming utility. Upload/Download, save, store, check, compare, and simulate panel databases. Upgrade panel firmware.

– Autoprogramming and Walk Test reports.

– Optional universal 318-point DACT.

– 80-character remote annunciators (up to 32).

– EIA-485 annunciators, including custom graphics.

– Printer interface (80-column and 40-column printers).

– History file with 800-event capacity in nonvolatile memory, plus separate 200-event alarm-only file.

– Alarm Verification selection per point, with tally.

– Autoprogramming and Walk Test reports.

– Presignal/Positive Alarm Sequence (PAS).

– Silence inhibit and Auto Silence timer options.

– NAC coding functions:

   + March time.

   + Temporal.

   + California two-stage coding.

   + Canadian two-stage.

   + Strobe synchronization.

– Field-programmable on panel or on PC, with VeriFire Tools program check, compare, simulate.

– Full QWERTY keypad.

– Battery charger supports 18 – 200 amp hour batteries.

– Non-alarm points for lower priority functions.

– Remote ACK/Signal Silence/System Reset/Drill via monitor modules.

– Automatic time control functions, with holiday exceptions.

– Surface Mount Technology (SMT) electronics.

– Extensive, built-in transient protection.

– Powerful Boolean logic equations.

Thông số kỹ thuật

– Primary input power, CPU-320E board: 220/240 VAC, 50/60Hz, 1.5A.

– Total output 24V power: 6.0 A in alarm.

– Standard notification circuits (4): 1.5 A each.

– Resettable regulated 24V power: 1.25 A.

– Two non-resettable regulated 24V power outputs:

   + 1.25 A

   + 0.50 A.

– Non-resettable 5V power: 0.15 A.

– Battery charger range: 18AH – 200AH. Use separate cabinet for batteries over 25 AH.

– Float rate: 27.6V.

– Bảo hành: 12 tháng.